Cable burial by ploughing has been clearly established as an effective and reliable method for burial of cables. Ploughs are simple tools that offer fast progress rates and a work in a range of seabed types.
Cable burial by ploughing has been clearly established as an effective and reliable method for burial of cables. Ploughs are simple tools that can be used offer fast progress rates and a work in a range of seabed types.
ETA specialise in providing unique plough systems dedicated to shallow water operations and shorter burial distances than many of the high cost market alternatives.
ETA’s focus on simple but effective engineering solutions mean bespoke ploughs can be designed and made often for a significantly lower cost. The ploughs are supplied with an easy to use control system similar to ETA’s jet sled system.
To discuss ETA’s range of ploughs please call us on:
PCP-1:
This Plough was designed and built specifically for installation of the new Solent crossing. The Plough is unique in its ability to simultaneously bury two cables through independent cable paths (One power and the one signal cable).
Outline Specification:
Simultaneous burial of power and telecom (signal) cables via dual independent cable paths.
Length Overall | 11.4m |
Width | 5.0m |
Height | 4.0m |
Weight in Air | 18.0t |
Working Tow Force | 100.0t |
Water Depth | 25m |
Outline Cont:
Trench Depth | 1.6m |
Power Cable Diameter | 10-180mm |
Power Cable MBR | 3.0m |
Telecom Cable Diameter | 50mm |
Telecom Cable MBR | 1.5m |
- 3 x 9 inch monochrome monitors
- Sonar processor and sonar monitor
- HMI for graphical display of vehicle status
- Camera and light PSU’s
- Ram controls
- RS 232 survey data link
- Analogue inputs for optional deck equipment e.g. tow tension
- Port skid height
- Stbd skid height
- Power cable depressor height
- Telecom cable depressor height
- Bellmouth position
- Bridge unit position
- Burial depth
- Pitch
- Roll
- 3 x mini monochrome CCD cameras
- 4 x 24 VDC lights
Analogue inputs are available subsea for optional sensors and additional surveillance equipment .eg. sonar can be fitted if required.
- 2 x Skid ram, subsea specification with spherical bearings both ends, fitted with ROTA linear transducer
- 2 x Depressor ram, subsea specification with spherical bearings both ends, fitted with ROTA linear transducer
- 1 x Bellmouth ram, subsea specification with spherical bearings both ends, fitted with ROTA linear transducer
- 1 x Bridge unit ram, subsea specification with spherical bearings both ends, fitted with ROTA linear transducer
- 6 station, stainless steel, oil filled, pressure compensated valve tank with polycarbonate lid
- 4.0 kW electric driven hydraulic power pack

Umbilical:
- 2 x 250m 3/8 inch R2AT hose
- 1 x 300m Scorpio style umbilical
LWP:
Outline Specification:
Length Overall | 8.0m |
Width | 4.0m |
Height | 3.0m |
Weight in Air | 8.0t |
Working Tow Force | 50.0t |
Outline Cont:
Water Depth | 25.0m |
Trench Depth | 1.7m |
Product Diameter | 10-180mm |
Product MBR | 1.5m |
- 2 x 9 inch monochrome monitors
- HMI for graphical display of vehicle status
- Camera and light PSU’s
- Ram controls
- RS 232 survey data link
- Analogue inputs for optional deck equipment e.g. tow tension
- 1 x 150m Electrical umbilical, extruded polyurethane jacket 17mm OD fitted top and bottom with subsea connectors
- Burial depth
- Skid height
- Depressor height
- Pitch
- Roll
- 2 x mini monochrome CCD cameras
- 2 x 24 v lights
Analogue inputs are available subsea for optional sensors and additional surveillance equipment .eg. sonar can be fitted if required.
- Skid ram, subsea specification with spherical bearings both ends, fitted with ROTA linear transducer
- Depressor ram, subsea specification with spherical bearings both ends, fitted with ROTA linear transducer
- 2 x Directional control valve with speed control, relief and check valves, fitted onto hydraulic power pack
- 4.0 kW electric driven hydraulic power pack
Umbilical:
- 4x 150m 3/8 inch R2AT hose